Essiccatore a nastro in rete

Our mesh belt drying equipment is a custom product, the working principle is that the machine is the use of hot air a a drying medium and wet material contact movement, so that the moisture contained in the wet material diffusion. vaporization and evaporation exclusion, to achieve the purpose of drying. The main heating methods are electric heating, steam heating, hot air heating. Can be customized according to customer demand output. According to the product type and process, set different drying temperatures, and design different drying cycle systems according to the type of drying products. It’s mainly composed of belt conveyor, automatic feeding machine, drying machine and so on. It has the function of automatic feed, automatic discharge and automatic control. It also has the advantage of less heat consumption, high production efficiency, simple operation, easy maintenance and wide range of application.

Drying Process
1. Put the wet material on feeding device, The material through the homogenizer was spread evenly and entered from the top of the dryer.
2. The material is transported by multi-layer mesh belt from top layer to bottom layer in the oven.
3. At the same time, the heat source produce heat and come into the oven from the bottom. Because the lower pressure is greater than the upper pressure, the hot air naturally moves upward, passing through each layer of the mesh belt. And with the movement and rolling of the material, the material fully contact with the hot air and fully heat exchange, which improve the drying efficiency.
4. After heat exchange, the moisture is evaporated from the top, and the material is discharged from the outlet after drying.